Suprapubic Catheter Care

What is a suprapubic catheter? A suprapubic catheter is a thin, sterile tube used to drain urine from your bladder when you cannot urinate. This type of catheter is used if you aren’t able to use a catheter that is inserted into the urethra. The urethra carries urine from the bladder out of the body. An opening between…

Suprapubic Catheter Care

Topic Overview

What is a suprapubic catheter?

A suprapubic catheter is a thin, sterile tube used to drain urine from your bladder when you cannot urinate. This type of catheter is used if you aren’t able to use a catheter that is inserted into the urethra. The urethra carries urine from the bladder out of the body.

An opening between your bladder and your abdomen must be made first. This can be done from the inside of the bladder out through the abdomen or from the outside of the abdomen into the bladder.

Your doctor inserts the catheter into the bladder through a cut (incision) in your lower belly, just above the pubic bone.

When the catheter is in the bladder, a small balloon is inflated to keep the catheter in place.

The urine drains from the bladder into a bag that is usually attached to the thigh. Sometimes the catheter tube has a valve that lets you drain the urine into the toilet or other container.

You may need this type of catheter if you have nerve damage or if you have problems with your bladder or urethra.

How long you have the catheter depends on why you have it. Many people need it for long periods of time.

Having a catheter for a long time increases the risk of getting a urinary tract infection. Home care focuses on preventing infection.

How do you care for the catheter?

  • Always wash your hands with soap and water before and after handling your catheter.
  • Make sure that the catheter tubing does not get twisted or kinked, and that urine is flowing out of the catheter into the urine collection bag.
  • Keep the urine collection bag below the level of your bladder.
  • Make sure that the urine collection bag does not drag and pull on the catheter.
  • You can shower with your catheter and urine collection bag in place unless you have been told not to.
  • Clean the bag every day after removing it from the catheter. Use another container while you clean the bag. To clean the bag, fill it with 2 parts vinegar to 3 parts water and let it stand for 20 minutes. Then empty it out, and let it air-dry.

How do you care for your incision?

Clean the area around the catheter with soap and water once a day.

How do you empty the drainage bag?

Empty the drainage bag when it is full or at least every 8 hours.

  • Wash your hands with soap and water. If you are emptying another person’s collection bag, you may wish to wear disposable gloves.
  • Remove the drain spout from its sleeve at the bottom of the collection bag. Open the valve on the spout.
  • Let the urine flow out of the bag and into the toilet or a container. Do not let the tubing or drain spout touch anything.
  • After you empty the bag, wipe off any liquid on the end of the drain spout. Close the valve and put the drain spout back into its sleeve at the bottom of the collection bag.
  • Wash your hands again with soap and water.

How do you replace your catheter?

Your catheter may have to be replaced every 4 to 6 weeks. A caregiver may do this for you.

You may be given a catheter kit that has the supplies you need. If you have not received a kit, ask your doctor what you’ll need. Some of the things you’ll need include a new catheter, syringes, sterile fluid, gloves, skin cleaning supplies, and lubricant.

Here are general instructions for replacing the catheter. Your doctor, nurse, or home health care worker may give you more specific instructions.

Removing the catheter

  • Wash your hands with soap and water, and put on gloves.
  • Fill a syringe with the fluid provided in the catheter kit.
  • If there is a dressing on the insertion site, remove it. Clean the area around the catheter with the supplies from the catheter kit.
  • Use another syringe to take out the water from the catheter balloon.
  • Hold the catheter close to where it goes into your belly. Gently pull the catheter up and away from you until it comes out.

Putting a new catheter in

Don’t wait to put in the new catheter. If you wait, the opening can close.

  • Wash your hands and put on a new pair of sterile gloves.
  • Lubricate the catheter tip and push it through the opening in your belly. Push it in as far as the other catheter was placed.
  • When the catheter is in place, urine should begin to flow through it. This may take a few minutes.
  • Inflate the balloon using the first syringe, which you filled with fluid from the kit.

When should you call for help?

Call your doctor now or seek immediate medical care if:

  • Your catheter becomes blocked and urine does not collect in the drainage bag.
  • Your catheter leaks.
  • You have blood or pus in your urine.
  • You have pain in your back just below your rib cage. This is called flank pain.
  • You have a fever, chills, or body aches.
  • You have groin or belly pain.
  • Your urine is cloudy or smells bad.
  • You have pain, increasing redness, or bleeding around the catheter.
  • You have swelling around the catheter or in your belly.

Credits

Current as ofDecember 19, 2018

Author: Healthwise Staff
Medical Review: Kathleen Romito MD – Family Medicine
Martin J. Gabica MD – Family Medicine
Adam Husney MD – Family Medicine
E. Gregory Thompson MD – Internal Medicine
Elizabeth T. Russo MD – Internal Medicine

This information does not replace the advice of a doctor. Healthwise, Incorporated, disclaims any warranty or liability for your use of this information. Your use of this information means that you agree to the Terms of Use. Learn how we develop our content.